Molybdate>>
Ammonium Molybdate MSDS
Section 1: Chemical Product and Company Identification
| Product Name: | Ammonium molybdate tetrahydrate |
| Catalog Codes: | SLA4099, SLA1753 |
| CAS# | 12027-67-7 |
| RTECS: | QA4900000 |
| TSCA: | TSCA 8(b) inventory |
| CI#: | Not available |
| Synonym: | Hexaammonium molybdate |
| Chemical Name: | Not available |
| Chemical Formula: | (NH4)6Mo7O24.4H2O |
| Company: | ChinaTungsten Online (Xiamen) Manu. & Sales Corp. |
| Address: | 3F, No.25 WH Rd., Xiamen Software Park Ⅱ, FJ 361008,China |
| info@chinatungsten.com |
Section 2: Composition and Information on Ingredients
| Product Name: | Ammonium molybdate tetrahydrate |
| CAS#: | 12027-67-7 |
| % by Weight: | 100 |
| Toxicological Data on Ingredients: | Ammonium molybdate tetrahydrate: ORAL (LD50): Acute: 333 mg/kg [Rat] |
Section 3: Hazards Identification
| Potential Acute Health Effects: |
| Very hazardous in case of eye contact (irritant), of ingestion, of inhalation. Hazardous in case of skin contact (irritant). Inflammation of the eye is characterized by redness, watering, and itching. |
| Potential Chronic Health Effects: |
| Very hazardous in case of eye contact (irritant), of ingestion, of inhalation. Hazardous in case of skin contact (irritant). CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available. |
Section 4: First Aid Measures
| 1.Eye Contact: |
| Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention immediately. |
| 2.Skin Contact: |
| In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used.Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention. |
| 3.Serious Skin Contact: |
| Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate medical attention. |
| 4.Inhalation: |
| If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. |
| 5.Serious Inhalation: Not available |
| 6.Ingestion: |
| Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband. |
| 7.Serious Ingestion: Not available. |
Section 5: Fire and Explosion Data
| Flammability of the Product: | Non-flammable |
| Auto-Ignition Temperature: | Not applicable |
| Flash Points: | Not applicable |
| Flammable Limits: | Not applicable |
| Products of Combustion: | Not available |
| Fire Hazards in Presence of Various Substances: | Not applicable |
| Explosion Hazards in Presence of Various Substances: | -- |
| Fire Fighting Media and Instructions: | Not applicable |
| Special Remarks on Fire Hazards: | Not available |
| Special Remarks on Explosion Hazards: | Not available |
| Risks of explosion of the product in presence of mechanical impact: | Not available |
| Risks of explosion of the product in presence of static discharge: | Not available |
Section 6: Accidental Release Measures
| Small Spill: |
| Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements. |
| Large Spill: |
| Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. |
Section 7: Handling and Storage
| Precautions: |
| Do not ingest. Do not breathe dust. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. |
| Storage: |
| Keep container tightly closed. Keep container in a cool, well-ventilated area. |
Section 8: Exposure Controls/Personal Protection
| Engineering Controls: |
| Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. |
| Personal Protection: |
| Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves. |
| Personal Protection in Case of a Large Spill: |
| Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product. |
| Exposure Limits: Not available. |
Section 9: Physical and Chemical Properties
| Physical state: | Solid. (Crystalline solid.) | pH (1% soln/water): | Not available |
| Odor: | Ammoniacal. (Slight.) | Boiling Point: | Not available |
| Critical Temperature: | Not available. | Melting Point: | Decomposes |
| Molecular Weight: | 1235.86 g/mole | Taste: | Not available |
| Color: | White or light-green | Volatility: | Not available |
| Odor Threshold | Not available | Vapor Density: | Not available |
| Specific Gravity: | 2.276 (Water = 1) | Vapor Pressure: | Not applicable |
| Water/Oil Dist. Coeff.: | Not available | Ionicity (in Water) | Not available |
| Dispersion Properties | See solubility in water | Solubility: | soluble in water |
Section 10: Stability and Reactivity Data
| Stability: | The product is stable. |
| Instability Temperature: | Not available |
| Conditions of Instability: | Not available |
| Incompatibility with various substances: | Not available |
| Corrosivity: | Non-corrosive in presence of glass |
| Special Remarks on Reactivity: | Not available |
| Special Remarks on Corrosivity: | Not available |
| Polymerization: | Will not occur |
Section 11: Toxicological Information
| Routes of Entry: | Eye contact. Inhalation. Ingestion. |
| Toxicity to Animals: | Acute oral toxicity (LD50): 333 mg/kg [Rat]. |
| Chronic Effects on Humans: | Not available. |
| Special Remarks on Toxicity to Animals: | Not available. |
| Special Remarks on Chronic Effects on Humans: | Not available. |
| Special Remarks on other Toxic Effects on Humans: | Not available. |
| Other Toxic Effects on Humans: | |
| Very hazardous in case of ingestion, of inhalation. Hazardous in case of skin contact (irritant). | |
Section 12: Ecological Information
| Ecotoxicity: Not available. |
| BOD5 and COD: Not available. |
| Products of Biodegradation: |
| Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise. |
| Toxicity of the Products of Biodegradation: The products of degradation are as toxic as the original product. |
| Special Remarks on the Products of Biodegradation: Not available. |
Section 13: Disposal Considerations
| Waste Disposal: | |
| Waste must be disposed of in accordance with federal, state and local environmental control regulations. | |
| DOT Classification: | Not a DOT controlled material (United States). |
Section 14: Transport Information
| Identification: | Not applicable. |
| Special Provisions for Transport: | Not applicable. |
| Federal and State Regulations:-- | |
Section 15: Other Regulatory Information
| Pennsylvania RTK: | |||
| Ammonium molybdate tetrahydrate Massachusetts RTK: Ammonium molybdate tetrahydrate TSCA 8(b). | |||
| inventory: Ammonium molybdate tetrahydrate | |||
| Other Regulations: OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200). | |||
| Other Classifications: | |||
| WHMIS (Canada): | |||
| CLASS D-1B: Material causing immediate and serious toxic effects (TOXIC). CLASS D-2B: Material causing other toxic effects (TOXIC). | |||
| DSCL (EEC): | |||
| R22- Harmful if swallowed. R38- Irritating to skin. R41- Risk of serious damage to eyes. S2- Keep out of the reach of children. S26- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S39- Wear eye/face protection. S46- If swallowed, seek medical advice immediately and show this container or label. | |||
| HMIS (U.S.A.): | |||
| Health Hazard: | 2 | Reactivity: | 0 |
| Fire Hazard: | 0 | Personal Protection: | E |
| National Fire Protection Association (U.S.A.): | |||
| Health: | 2 | Flammability: | 0 |
| Reactivity: | 0 | Specific hazard: | - |
| Protective Equipment: | |||
| Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Splash goggles. | |||
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Chinatungsten has been advised of the possibility of such damages.
If you have got any question or inquiry of molybdenum, please feel free to contact us by email: sales@chinatungsten.com, sales@xiamentungsten.com or by telephone:86 592 512 9696/86 592 512 9595.
| Moly Information | Chinatungsten | Molybdenum Price | Molybdenum News| Molybdenum Pictures |
| Chinatungsten Group | Tungsten Metal | Tungsten Carbide | Tungsten Powder | Tungsten Heavy Alloy | Molybdenum Needle | Molybdenum Wire Mo Rod | Titanium Zirconium Molybdenum| Mo Electrodes | Mo Crucible | Mo Foil | Molybdenum in Sapphire Growth Furnace |